This industrial-grade Nylon stock sheet offers exceptional toughness and abrasion resistance. Its substantial thickness provides superior impact protection and durability for demanding safety and mechanical applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.947" |
| Length | 42" |
| Width | 38" |
Engineered for reliability and performance, this 0.947" thick Nylon stock sheet measures 42" in length and 38" in width. Nylon's inherent properties of high tensile strength, excellent wear resistance, and good chemical inertness make it ideal for applications requiring robust material solutions. Its impact absorption capabilities and self-lubricating nature further enhance its utility in environments subject to friction and stress. This sheet is manufactured to stringent industrial standards for consistent quality and predictable performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using mechanical fasteners or adhesives suitable for both the Nylon and the mating surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that can tear through the Nylon. | Utilize fasteners with a larger bearing surface area or washers to distribute load evenly. |
| Overheating the Nylon during cutting, leading to melting or degradation. | Employ sharp cutting tools and adequate cooling (e.g., air jet) to maintain material integrity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Impact Plates and Bumpers, Gaskets and Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||