This robust Nylon stock sheet offers exceptional durability and impact resistance for critical safety components. Its substantial thickness and high-tensile strength make it ideal for demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.945" |
| Length | 22" |
| Width | 40" |
Manufactured under strict quality controls, this 0.945-inch thick Nylon stock sheet boasts superior wear resistance, low friction, and excellent impact strength. Its dimensions of 22 inches by 40 inches provide ample material for fabrication of guards, wear pads, and custom industrial components requiring high mechanical performance and chemical inertness. This engineered thermoplastic exhibits a high load-bearing capacity and excellent dimensional stability under stress, ensuring reliable operation in challenging conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the mounting surface thoroughly. 2. Precisely measure and cut the nylon sheet to the required dimensions using appropriate tooling. 3. Secure the nylon sheet using designated fasteners or adhesives, ensuring a flush and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Employ sharp, specialized cutting tools for plastics to ensure clean edges and prevent material damage or melting. |
| Inadequate surface preparation before fastening. | Ensure the mounting surface is free of debris, grease, and moisture to guarantee optimal adhesion or mechanical bond. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Machine guards and safety shields, Wear strips and guide rails, Impact-resistant components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||