This robust Nylon stock sheet offers superior wear resistance and self-lubricating properties. Its substantial 0.941" thickness provides excellent structural integrity for demanding industrial applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.941" |
| Length | 37" |
| Width | 21" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a precise thickness of 0.941 inches, a length of 37 inches, and a width of 21 inches. Composed of high-grade Nylon, it exhibits exceptional toughness, low coefficient of friction, and good chemical resistance, making it ideal for fabricating wear strips, bushings, rollers, and other components requiring reduced friction and extended service life in dynamic environments. Its dimensional stability ensures consistent performance under varying loads and temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the Nylon stock sheet using a suitable marker. 2. Cut the sheet to size using appropriate cutting tools such as a band saw or CNC router. 3. Deburr all edges to ensure a clean finish and prevent material chipping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or poor cut quality. | Employ sharp, carbide-tipped saw blades or router bits specifically designed for cutting Nylon to achieve clean, precise cuts without excessive heat buildup. |
| Over-tightening fasteners, which can deform the Nylon and compromise its structural integrity. | Use appropriate torque settings when fastening components made from Nylon stock. Consider using washers to distribute pressure and avoid direct contact with sharp edges. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Rollers and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||