This robust Nylon stock sheet offers exceptional durability and wear resistance, making it the ideal material for demanding industrial cutting and fabrication applications where performance is critical.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.915" |
| Length | 40" |
| Width | 17" |
Designed for demanding industrial environments, this 0.915-inch thick Nylon stock sheet (40" length, 17" width) provides superior mechanical strength and low coefficient of friction. Its high impact resistance, excellent machinability, and resistance to abrasion and chemicals ensure reliable performance in applications such as wear pads, bushings, and custom-engineered components. The dense polymer structure minimizes moisture absorption, maintaining dimensional stability under varying conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark the desired cut lines on the Nylon stock sheet. 2. Utilize appropriate sawing and cutting tools with sufficient power and sharp blades designed for plastic materials. 3. Ensure proper clamping and support of the sheet during cutting to prevent vibration and ensure clean edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking blades without proper tooth geometry for plastics. | Employ blades with a high tooth count and negative rake angle specifically designed for cutting Nylon to prevent melting and chipping. |
| Insufficient support of the stock sheet during cutting, leading to vibration and rough edges. | Utilize a sturdy cutting table and clamps to securely hold the Nylon sheet, minimizing movement and ensuring precise cuts. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Machined wear components, Custom tooling and fixtures, Impact-resistant guards and shields.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||