Engineered for exceptional performance, this high-density Nylon stock sheet provides superior self-lubricating properties and excellent wear resistance. Ideal for components requiring reduced friction and extended service life in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.897" |
| Length | 28" |
| Width | 26" |
Built to exacting engineering tolerances, this Nylon stock sheet, measuring 0.897 inches thick, 28 inches in length, and 26 inches in width, is manufactured from a premium, wear-resistant nylon formulation. Its inherent low coefficient of friction and excellent compressive strength make it suitable for fabricating bushings, bearings, wear pads, and guide rails. The material exhibits good chemical resistance and operates effectively across a broad temperature range, ensuring reliability in diverse industrial settings. Machinability is excellent, allowing for precise custom part fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Accurately machine to final dimensions using standard cutting tools for nylon. 3. Apply appropriate adhesives or mechanical fasteners as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Machining with excessive heat, leading to material softening or melting. | Utilize sharp tooling and adequate coolant to maintain optimal machining temperatures. |
| Over-tightening fasteners, causing localized stress and potential cracking. | Employ torque-controlled fastening methods and consider using washers to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Low-friction wear strips, Self-lubricating bushings, Custom bearing components, Guide and slide elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||