This high-performance Nylon Stock Sheet provides exceptional wear resistance, low friction, and excellent impact strength. Precisely manufactured to tight tolerances, it's ideal for fabricating custom components.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.895" |
| Length | 31" |
| Width | 31" |
Specified by design engineers worldwide, this Nylon Stock Sheet offers a robust solution for applications demanding superior mechanical properties. With a substantial thickness of 0.895 inches and generous dimensions of 31 inches by 31 inches, it provides ample material for complex machining. Nylon's inherent excellent abrasion resistance, high tensile strength, and good chemical resistance make it suitable for load-bearing components, wear pads, and structural elements in diverse industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure cutting surfaces are clean and free of debris. 2. Utilize a carbide-tipped blade specifically designed for plastics for clean cuts. 3. Employ appropriate clamping techniques to prevent movement during machining.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard wood-cutting blades which can lead to melting and chipping. | Always use blades formulated for cutting plastics, ensuring proper tooth geometry and feed rates. |
| Insufficient clamping, causing vibration and inaccurate cuts. | Securely clamp the sheet to the cutting surface with evenly distributed pressure, avoiding over-tightening which can distort the material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Wear Plates and Bushings, Machined Structural Components, Prototyping and Tooling Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||