This high-density Nylon stock sheet offers exceptional self-lubricating properties and superior wear resistance. Ideal for applications requiring reduced friction and extended component life.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.894" |
| Length | 17" |
| Width | 24" |
Manufactured under strict quality controls, this 0.894-inch thick Nylon stock sheet provides a robust solution for demanding industrial environments. Its inherent low coefficient of friction and high tensile strength make it suitable for wear pads, guides, and bearing surfaces where continuous lubrication is crucial. The material's excellent abrasion resistance ensures longevity in high-cycle applications. Dimensions are 17 inches in length and 24 inches in width, allowing for custom fabrication of specialized components. It exhibits good chemical resistance and can operate effectively within a moderate temperature range.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., band saw, CNC router) to achieve precise shapes, ensuring clean edges. 3. Securely fasten the fabricated Nylon components to the intended substrate using suitable fasteners or adhesives, considering thermal expansion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper tool selection leading to melting or chipping during cutting. | Employ sharp, high-speed cutting tools with adequate cooling to prevent material degradation. |
| Over-tightening fasteners, causing stress concentration and potential cracking. | Use washers and torque fasteners to a level that provides secure mounting without deforming the Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guide rails, Self-lubricating bearings and bushings, Chute liners and slide surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||