This 0.843" thick Nylon stock sheet offers exceptional durability and wear resistance, making it ideal for high-performance pneumatic components requiring robust material properties.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.843" |
| Length | 31" |
| Width | 47" |
Specified by design engineers worldwide, this 0.843" thick Nylon stock sheet is engineered for critical pneumatic applications. Its substantial thickness provides superior structural integrity and impact resistance, crucial for components subjected to high pressures and dynamic loads. Nylon's inherent properties of low friction, excellent abrasion resistance, and good chemical compatibility ensure longevity and reliable performance in demanding environments. The 31" x 47" dimensions offer ample material for fabricating custom parts such as piston seals, valve components, and protective shrouds within pneumatic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the fabricated component thoroughly to remove any debris or contaminants. 2. Ensure mating surfaces are smooth and free of burrs for optimal sealing. 3. Carefully install the Nylon component into the pneumatic assembly, following manufacturer guidelines for torque and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to potential cracking or deformation of the Nylon. | Adhere to recommended torque specifications for all fasteners used with Nylon components. |
| Exposure to extreme temperatures beyond Nylon's operational limits, causing degradation. | Verify that the operating temperature range of the pneumatic system is within the specified limits for Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic Cylinder Components, Valve Seals and Bushings, Wear Strips and Guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||