This premium Nylon stock sheet offers exceptional durability and wear resistance, making it ideal for custom fabrication in pneumatic systems. Its robust material properties ensure long-term performance under pressure.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.829" |
| Length | 12" |
| Width | 20" |
Trusted by engineers across multiple sectors, this 0.829" thick Nylon stock sheet (12" x 20") provides excellent mechanical strength, low friction, and good chemical resistance, crucial for reliable pneumatic component manufacturing. Its high tensile strength and impact resistance allow for the creation of robust seals, pistons, and wear pads. The material's inherent lubricity minimizes wear and tear, extending the operational life of pneumatic machinery and reducing maintenance requirements. Ideal for custom machining of specialized parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Machine the Nylon stock sheet to precise component dimensions using standard machining practices. 2. Deburr all edges thoroughly to prevent material stress concentrations. 3. Inspect finished components for dimensional accuracy and surface finish before integration into pneumatic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to material cracking or deformation. | Use appropriate torque values and consider the use of washers to distribute load evenly. |
| Machining at excessively high speeds or feed rates, causing tool chatter and poor surface finish. | Utilize recommended cutting speeds and feed rates for nylon, employing sharp tooling and adequate coolant. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Pneumatic Cylinder Components, Wear Strips and Bushings, Seals and Gaskets for Air Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||