This robust Nylon stock sheet provides exceptional wear resistance and mechanical strength. Measuring 0.801 inches thick, 28 inches long, and 24 inches wide, it's engineered for demanding industrial applications requiring high performance and durability.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.801" |
| Length | 28" |
| Width | 24" |
Trusted by engineers across multiple sectors, this 0.801" thick Nylon stock sheet (28" x 24") offers superior tensile strength, excellent abrasion resistance, and good impact toughness. Its low coefficient of friction makes it ideal for bearing surfaces and wear pads. Suitable for machining into gears, bushings, rollers, and custom tooling. Operating temperature range: -40°F to 180°F. Exhibits good resistance to chemicals and solvents.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired cut lines on the Nylon stock sheet. 2. Utilize appropriate sawing or cutting tools (e.g., band saw, circular saw with carbide-tipped blade) to make precise cuts. 3. Deburr all cut edges to ensure smooth surfaces and prevent material fatigue.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to chipping or melting of the Nylon. | Ensure cutting blades are sharp and specifically designed for plastics. Maintain a consistent feed rate and adequate cooling if necessary. |
| Applying excessive force during machining, causing delamination or cracking. | Use appropriate cutting speeds and feeds for Nylon. Avoid sudden movements or pressure changes. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Custom Bushings and Bearings, Tooling and Fixturing Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||