This high-quality Nylon stock sheet is engineered for superior performance in demanding environments. Its inherent lubricating properties reduce friction and wear, making it ideal for dynamic components and sliding applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.798" |
| Length | 31" |
| Width | 37" |
Precision-manufactured to tight tolerances, this Nylon stock sheet offers exceptional dimensional stability and consistent material properties. With a thickness of 0.798 inches, a length of 31 inches, and a width of 37 inches, it provides ample material for a variety of fabrication needs. The inherent self-lubricating nature of this polymer significantly reduces the need for external greases or oils, minimizing maintenance requirements and extending component lifespan. Its excellent wear resistance, high tensile strength, and good impact strength make it a preferred choice for industrial components subjected to continuous motion and moderate loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark desired cutouts on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., band saw, CNC router) for precise fabrication. 3. Smooth all edges to remove burrs and ensure clean finishes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper tool selection leading to chipping or melting during cutting. | Use sharp, high-speed steel or carbide-tipped cutting tools designed for plastics. Maintain appropriate feed rates to prevent excessive heat buildup. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Use washers and avoid overtightening. Allow for thermal expansion and contraction where applicable. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Conveyor components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||