This high-performance Nylon Stock Sheet offers exceptional durability and wear resistance. Precisely manufactured to 0.797" thickness, 16" width, and 22" length, it's ideal for fabricating custom components and solutions in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.797" |
| Length | 16" |
| Width | 22" |
Trusted by engineers across multiple sectors, this Nylon Stock Sheet exemplifies superior material performance. Measuring 0.797" thick, 16" wide, and 22" long, it is fabricated from high-grade nylon, renowned for its excellent tensile strength, impact resistance, and low coefficient of friction. This makes it an optimal choice for applications requiring robust structural integrity, effective vibration dampening, and reduced wear, such as custom jig and fixture components, wear pads, and protective elements in mechanical assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired dimensions on the nylon stock sheet. 2. Carefully cut the sheet using appropriate tools for nylon (e.g., bandsaw, router). 3. Deburr all cut edges for a smooth finish and to prevent material fatigue.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to melting or chipping. | Utilize sharp, carbide-tipped blades designed for plastics and ensure adequate cooling or lubrication during cutting. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Employ washers and torque fasteners to the manufacturer's recommended specifications for nylon, or use self-tapping screws designed for plastics. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Jig and Fixture Construction, Wear Strips and Bushings, Protective Guards and Bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||