This premium Nylon Stock Sheet is engineered for superior performance in demanding pneumatic systems. Its robust construction ensures longevity and reliability under high stress, making it ideal for critical components.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.793" |
| Length | 28" |
| Width | 26" |
A high-performance industrial component, this Nylon Stock Sheet boasts a substantial thickness of 0.793 inches, a generous length of 28 inches, and a width of 26 inches. Manufactured from high-grade nylon, it exhibits exceptional tensile strength, superior abrasion resistance, and excellent impact toughness, crucial for components subjected to frequent cycling and mechanical stress in pneumatic environments. Its inherent lubricity minimizes friction, contributing to efficient operation and reduced wear on mating parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free from debris. 2. Precisely cut the Nylon Stock Sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component according to system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly shaped components. | Always fabricate components to the exact specifications derived from system design calculations. |
| Insufficient surface preparation before installation. | Thoroughly clean and degrease all mating surfaces to ensure optimal adhesion and performance. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder components, Wear pads and guides, Custom seals and gaskets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||