This robust Nylon stock sheet offers superior mechanical properties for demanding industrial applications. Its precise dimensions and material characteristics make it ideal for custom fabrication and component replacement.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.786" |
| Length | 33" |
| Width | 34" |
A high-performance industrial component, this Nylon stock sheet is engineered for exceptional durability and machinability. Measuring 0.786 inches in thickness, 33 inches in length, and 34 inches in width, it provides ample material for a variety of custom-machined parts. Nylon's inherent properties, including high tensile strength, excellent wear resistance, low coefficient of friction, and good chemical resistance, make this sheet suitable for applications such as bearing surfaces, bushings, gears, and wear pads in challenging operating environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark cut lines on the Nylon stock sheet according to design specifications. 2. Secure the sheet firmly to a stable cutting surface using clamps or a vice. 3. Utilize a suitable saw blade (e.g., carbide-tipped) for clean and precise cuts, maintaining a consistent feed rate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect saw blade, leading to rough cuts and material stress. | Employ a sharp, appropriately toothed saw blade designed for plastics to ensure clean edges and prevent chipping. |
| Inadequate clamping of the stock sheet, causing vibration and inaccurate cuts. | Ensure the Nylon sheet is securely clamped to prevent movement during the sawing process. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom bearing and bushing fabrication, Wear components and guides, Prototyping of mechanical parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||