This robust Nylon stock sheet, measuring 0.761" thick, 13" wide, and 25" long, is engineered for high-performance pneumatic systems. Its exceptional durability ensures longevity in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.761" |
| Length | 13" |
| Width | 25" |
Trusted by engineers across multiple sectors, this Nylon stock sheet offers a superior blend of mechanical properties essential for pneumatic components. With a precise thickness of 0.761 inches, a width of 25 inches, and a length of 13 inches, it provides ample material for custom fabrication. The inherent strength, excellent abrasion resistance, and impact toughness of Nylon make it ideal for wear components, seals, and structural elements within pneumatic cylinders, valves, and air preparation units, ensuring operational reliability and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Machine or form the cut material to the precise specifications for your pneumatic component. 3. Ensure all mating surfaces are clean and free of debris before assembly into the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to chipping or delamination of the Nylon. | Employ sharp, high-speed cutting tools specifically designed for plastics, such as carbide-tipped saws or routers, and use a steady feed rate. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Utilize appropriate torque specifications for Nylon and consider using larger washers to distribute load if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder components (e.g., piston seals, wear bands), Valve seats and seals, Air preparation unit housings and components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||