This high-performance Nylon stock sheet offers exceptional durability and impact resistance. Its robust material properties and generous dimensions make it ideal for custom fabrication, tooling, and demanding industrial applications requiring a stable, wear-resistant surface.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.759" |
| Length | 39" |
| Width | 31" |
Precision-manufactured to tight tolerances, this Nylon stock sheet measures 0.759 inches thick, 39 inches in length, and 31 inches in width. Crafted from industrial-grade Nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, ensuring longevity and reliable performance in harsh environments. Its inherent chemical resistance makes it suitable for applications involving exposure to oils, solvents, and mild acids. This material is well-suited for use as wear plates, jigs, fixtures, and protective surfacing in manufacturing and processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from contaminants. 2. Accurately measure and cut the Nylon sheet to the required dimensions using appropriate cutting tools. 3. Secure the Nylon sheet using mechanical fasteners or suitable industrial adhesives, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to chipping or rough edges. | Utilize sharp, carbide-tipped saws or routers specifically designed for cutting plastics to achieve clean, precise edges. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Employ washers to distribute fastener pressure and tighten only until snug, avoiding excessive torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Plates and Bushings, Jigs, Fixtures, and Tooling, Protective Linings and Strips.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||