This 0.753" thick Nylon stock sheet is engineered for demanding industrial environments. Its robust construction and superior wear resistance make it an exceptional choice for custom fabrication and protective applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.753" |
| Length | 40" |
| Width | 29" |
Purpose-built for heavy-duty applications, this Nylon stock sheet boasts exceptional toughness and abrasion resistance. With dimensions of 0.753 inches (19.13 mm) thickness, 40 inches (1016 mm) length, and 29 inches (736.6 mm) width, it offers a substantial material volume for complex part creation. The inherent properties of nylon, including its high tensile strength, excellent impact absorption, and low coefficient of friction, make it suitable for applications such as wear pads, chutes, tooling components, and protective barriers where sustained performance under stress is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the nylon sheet to the desired dimensions using appropriate cutting tools for plastics. 2. Prepare the mounting surface, ensuring it is clean and free of debris. 3. Secure the nylon sheet using suitable fasteners, such as bolts or rivets, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metal cutting tools without appropriate blade geometry or speed. | Employ specialized carbide-tipped blades designed for cutting plastics, or use a router with a straight or spiral bit, maintaining moderate feed rates to prevent melting. |
| Over-tightening fasteners, leading to stress concentrations and potential cracking. | Use washers to distribute load and tighten fasteners until snug, avoiding excessive torque. Consider slotted holes for thermal expansion if appropriate. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and liners, Durable tooling and jigs, Impact and abrasion-resistant guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||