This robust Nylon Stock Sheet offers exceptional durability and chemical resistance. Precisely manufactured to 0.748" thickness, 44" length, and 18" width, it's ideal for custom fabrication and replacement parts in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.748" |
| Length | 44" |
| Width | 18" |
Built to exacting engineering tolerances, this Nylon Stock Sheet exhibits a nominal thickness of 0.748 inches, a length of 44 inches, and a width of 18 inches. Composed of high-grade nylon, it provides superior wear resistance, low friction, and excellent electrical insulation properties. Its inherent toughness and resistance to many chemicals, oils, and solvents make it suitable for applications such as wear pads, custom bushings, protective guards, and structural components where moderate load-bearing capacity and impact resistance are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) for precise fabrication. 3. Smooth any rough edges using sandpaper or a deburring tool.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or chipping. | Employ a saw blade specifically designed for cutting plastics, ensuring adequate cooling and appropriate feed rates. |
| Overheating the material during machining, causing dimensional instability. | Maintain controlled cutting speeds and use coolant if necessary to dissipate heat during fabrication. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Parts, Wear Strips and Bushings, Protective Shields and Guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||