This high-performance Nylon stock sheet provides exceptional wear resistance and a low coefficient of friction, making it ideal for robust industrial fabrication and wear components.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.737" |
| Length | 42" |
| Width | 14" |
A high-performance industrial component, this Nylon stock sheet is manufactured to exacting standards with a precise thickness of 0.737 inches, a width of 14 inches, and a length of 42 inches. Its inherent material properties include superior tensile strength, excellent impact resistance, and high abrasion resistance, making it suitable for applications subjected to significant mechanical stress and wear. The material's low moisture absorption and good chemical resistance further enhance its reliability in diverse operational environments, from gears and bearings to wear pads and custom-machined parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and mark cutting lines on the Nylon stock sheet according to design specifications. 2. Employ a suitable industrial saw (e.g., band saw, circular saw) with a sharp, fine-tooth blade designed for plastics to ensure clean cuts and minimize material stress. 3. Smooth any cut edges using a deburring tool or fine-grit sandpaper for a finished appearance and to prevent snagging.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or inappropriate saw blade, leading to chipping, melting, or rough edges. | Utilize a sharp, high-tooth-count blade specifically designed for cutting nylon or plastics. Maintain proper saw speed and feed rate to avoid excessive heat buildup. |
| Improper clamping of the stock sheet, causing vibration and inaccurate cuts. | Securely clamp the Nylon sheet to the saw's table or workbench using non-marring clamps to prevent movement and ensure a stable cutting platform. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Gears and Sprockets, Wear Strips and Bushings, Protective Liners and Bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||