Engineered for rigorous pneumatic systems, this 0.731-inch thick Nylon stock sheet offers exceptional durability and wear resistance. Its substantial dimensions ensure ample material for diverse fabrication needs.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.731" |
| Length | 39" |
| Width | 48" |
A high-performance industrial component, this Nylon stock sheet (0.731" thickness, 39" length, 48" width) is specifically designed for the demanding environments of pneumatic applications. Exhibiting excellent tensile strength, abrasion resistance, and a low coefficient of friction, this material minimizes wear and tear on moving parts within pneumatic machinery. Its inherent toughness and resistance to moisture and chemicals make it an ideal substrate for fabricating custom seals, wear pads, and guide components where reliability under pressure and friction is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and precisely cut the Nylon stock sheet to the required dimensions for your pneumatic component. 2. Prepare mating surfaces for secure adhesion or mechanical fastening, ensuring cleanliness and flatness. 3. Install the fabricated Nylon component into the pneumatic system, verifying proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient material thickness for high-pressure applications. | Always select Nylon stock sheet thickness that exceeds the calculated stress and pressure requirements for your specific pneumatic system. |
| Inadequate surface preparation leading to premature failure. | Thoroughly clean and deburr all cut edges and mating surfaces to ensure optimal adhesion or secure mechanical engagement. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic Cylinder Seals and Gaskets, Wear Strips and Guide Bushings for Actuators, Custom Fabrication of Pneumatic Component Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||