This high-density Nylon stock sheet is engineered for demanding applications requiring excellent wear resistance and integrated lubrication. Its robust properties make it ideal for fabricating custom components that operate under friction and load.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.725" |
| Length | 44" |
| Width | 40" |
Engineered for reliability and performance, this lubricating Nylon stock sheet boasts a substantial 0.725-inch thickness, a generous 44-inch length, and a 40-inch width. Manufactured from high-grade Nylon, it exhibits superior tensile strength, abrasion resistance, and a low coefficient of friction due to its inherent self-lubricating properties. This material is specifically designed to reduce wear and extend the service life of moving parts in industrial machinery, conveyor systems, and various mechanical assemblies where traditional lubrication is challenging or undesirable.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 2. Machine or form the cut material into the desired component shape, adhering to strict dimensional tolerances. 3. Securely install the fabricated Nylon component in its intended application, ensuring proper alignment and operational clearance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard Nylon instead of lubricating grade for high-friction applications. | Always specify and use lubricating grade Nylon stock sheet for components subjected to significant wear and friction. |
| Inadequate machining clearance leading to binding. | Ensure sufficient clearance is maintained during installation to account for potential thermal expansion and to prevent friction-induced binding. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Conveyor components, Gears and sprockets, Chute liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||