This robust nylon stock sheet is precision-engineered for superior durability and performance. Its dense composition offers excellent wear resistance, making it ideal for fabricating custom components and tooling in industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.719" |
| Length | 13" |
| Width | 16" |
Built to exacting engineering tolerances, this 0.719-inch thick nylon stock sheet measures 13 inches in length and 16 inches in width. Manufactured from high-density nylon, it exhibits exceptional mechanical strength, abrasion resistance, and a low coefficient of friction. These properties make it suitable for creating wear pads, bushings, silent gears, and protective components that require resilience against impact and friction in demanding industrial applications. Its non-absorbent nature further enhances its suitability for environments with moisture exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired cut dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., band saw, router) with coolant to prevent overheating. 3. Smooth cut edges using a file or deburring tool for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive heat during cutting, leading to melting or warping. | Employ a sharp cutting tool and apply a continuous flow of coolant during the cutting process. |
| Attempting to drill without pilot holes or with dull drill bits, causing chipping. | Start with a smaller pilot hole and gradually increase drill bit size. Ensure drill bits are sharp and designed for plastic. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guides, Custom bushings and bearings, Protective covers and guards, Gears and sprockets, Stamping dies and form tools.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||