This premium Nylon stock sheet, engineered for superior lubrication, provides exceptional wear resistance and low friction. Its robust dimensions make it ideal for custom fabricated components and demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.717" |
| Length | 33" |
| Width | 18" |
Specified by design engineers worldwide, this lubricating grade Nylon stock sheet offers a precise thickness of 0.717 inches, a substantial length of 33 inches, and a width of 18 inches. Manufactured from high-quality Nylon, it exhibits excellent self-lubricating properties, low coefficient of friction, and superior abrasion resistance. These characteristics make it an ideal material for bearing surfaces, wear pads, guide rails, and other components subjected to continuous motion and friction in machinery and automation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any contaminants. 2. Precisely machine the Nylon stock sheet to the required dimensions and tolerances. 3. Securely fasten the fabricated component using appropriate hardware, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing stress concentration and potential cracking. | Use washers and tighten fasteners gradually and evenly to distribute load, avoiding excessive torque. |
| Machining without adequate coolant, leading to excessive heat and deformation. | Employ appropriate cutting speeds and use coolant during machining to manage heat buildup and maintain dimensional accuracy. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Wear Strips and Guides, Self-Lubricating Bearings and Bushings, Impact and Abrasion Resistant Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||