This high-performance Nylon stock sheet offers exceptional wear resistance and low friction. Its inherent lubricity makes it ideal for applications requiring reduced maintenance and extended component life.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.705" |
| Length | 24" |
| Width | 40" |
Built to exacting engineering tolerances, this 0.705" thick Nylon stock sheet measures 24" in length and 40" in width. Manufactured from a specially formulated self-lubricating nylon compound, it exhibits a low coefficient of friction (typically 0.1-0.3) and excellent abrasion resistance, ensuring minimal wear in dynamic applications. Its high tensile strength (approx. 10,000-14,000 psi) and impact resistance make it suitable for demanding environments. Common applications include wear strips, guide rails, bushings, and rollers where reduced lubrication is a primary design consideration.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Carefully position the nylon stock sheet according to design specifications. 3. Secure the sheet using appropriate fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress concentrations and potential cracking. | Use washers and torque fasteners to the manufacturer's recommended specifications to distribute load evenly. |
| Ignoring the coefficient of thermal expansion, causing binding or loosening. | Account for thermal expansion in the design by incorporating appropriate clearance or expansion joints. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Rollers and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||