This robust Nylon stock sheet is engineered for superior performance in suspending and bracing applications. Its exceptional strength, wear resistance, and impact toughness make it the material of choice for critical industrial components.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.699" |
| Length | 44" |
| Width | 43" |
Specified by design engineers worldwide, this Nylon stock sheet delivers exceptional mechanical performance. With a precise thickness of 0.699 inches, a generous length of 44 inches, and a width of 43 inches, it offers substantial material for various fabrication needs. Composed of high-grade Nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, ensuring longevity and reliability in demanding dynamic and static load-bearing applications, including custom-machined structural supports and wear pads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark the desired dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) for precise fabrication. 3. Securely fasten the fabricated component using compatible hardware, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense polymers, leading to chipping or melting. | Employ specialized carbide-tipped blades for plastics or waterjet cutting for clean, precise edges. |
| Over-tightening fasteners, causing stress concentrations and potential delamination or cracking. | Utilize torque-limiting drivers and consider using washers to spread the load evenly across the mounting surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Bracing Components, Structural Supports, Wear Strips and Bushings, Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||