This high-performance Nylon stock sheet offers exceptional dielectric strength and mechanical resilience. Ideal for demanding electrical and lighting applications requiring robust insulation and structural integrity.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.698" |
| Length | 41" |
| Width | 35" |
Built to exacting engineering tolerances, this 0.698-inch thick Nylon stock sheet measures 41 inches in length and 35 inches in width. Nylon's inherent electrical insulation properties make it a superior choice for applications demanding high dielectric strength and arc resistance. Its excellent mechanical strength and wear resistance ensure durability in harsh environments, while its thermal stability allows for use in moderate temperature ranges common in electrical enclosures and lighting fixtures. This material is also resistant to many common chemicals, further enhancing its suitability for industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon stock sheet is clean and free of contaminants. 2. Accurately measure and cut the sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet in its intended application using mechanical fasteners or adhesives, ensuring proper grounding if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard plastic cutters that can chip or crack the Nylon. | Utilize carbide-tipped saw blades or router bits specifically designed for cutting hard plastics to achieve clean, precise edges. |
| Over-tightening fasteners, which can lead to stress cracking in the Nylon. | Employ washers and tighten fasteners only to the point of snugness, avoiding excessive torque to prevent material deformation or damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Electrical insulation barriers, Custom electrical enclosures, Lighting fixture components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||