This robust Nylon stock sheet is engineered for demanding lubricating applications. Its inherent low coefficient of friction and excellent wear resistance make it ideal for fabricating components that require smooth, consistent movement and extended service life.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.693" |
| Length | 33" |
| Width | 47" |
Precision-manufactured to tight tolerances, this Nylon stock sheet boasts exceptional dimensional stability and consistent material properties throughout its 0.693-inch thickness. Engineered for lubricating applications, its molecular structure provides a naturally low coefficient of friction and superior wear resistance, minimizing heat buildup and extending component lifespan. The substantial 33-inch length and 47-inch width allow for efficient fabrication of larger parts or multiple smaller components, making it a cost-effective solution for high-volume production runs. Its resilience to abrasion and impact further enhances its suitability for demanding operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and free of debris. 2. Accurately measure and mark the desired dimensions using appropriate marking tools. 3. Cut the nylon sheet using a suitable saw blade designed for plastics, ensuring a smooth, burr-free edge.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a blade not designed for plastics, leading to chipping or melting. | Employ a sharp, fine-tooth saw blade specifically rated for cutting nylon or plastics to achieve clean cuts and prevent material damage. |
| Overheating the material during cutting, causing deformation. | Use a moderate cutting speed and consider employing a coolant or lubricant to dissipate heat and maintain material integrity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Slide plates and rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||