This robust Nylon stock sheet is engineered for demanding pneumatic applications. Its substantial thickness and superior material properties ensure longevity and reliable performance under extreme conditions.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.693" |
| Length | 33" |
| Width | 44" |
Purpose-built for heavy-duty applications, this Nylon stock sheet boasts a significant 0.693-inch thickness, a 33-inch length, and a 44-inch width. Crafted from high-grade Nylon, it exhibits exceptional tensile strength, abrasion resistance, and a low coefficient of friction, making it ideal for components subjected to significant mechanical stress and continuous operation. Its inherent chemical resistance further enhances its suitability for environments where exposure to oils, greases, and common industrial solvents is expected, ensuring extended service life in critical pneumatic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Precisely cut the Nylon to the required dimensions using appropriate tooling. 3. Securely fasten the cut Nylon component into its intended pneumatic system location, verifying proper fit and seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard thickness sheets for high-pressure pneumatic lines. | Always specify and utilize the 0.693" thickness for applications requiring superior impact and pressure resistance. |
| Inadequate surface preparation before assembly. | Thoroughly clean and deburr all cut edges of the Nylon sheet to ensure optimal sealing and prevent premature wear. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder components, Sealing elements in high-pressure systems, Wear pads and guide bushings for pneumatic machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||