Engineered from durable nylon, this stock sheet offers exceptional wear resistance, low friction, and excellent electrical insulation properties. Its robust dimensions make it suitable for a wide range of custom fabrication and protective applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.691" |
| Length | 43" |
| Width | 26" |
Trusted by engineers across multiple sectors, this 0.691" thick nylon stock sheet measures 43" in length and 26" in width. Exhibiting superior tensile strength, impact resistance, and chemical inertness, it is an ideal material for demanding environments. Its low coefficient of friction makes it suitable for sliding components and wear pads, while its dielectric properties ensure effective electrical insulation in control systems and housings. This versatile material is readily machinable for precise component creation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly before application. 2. Cut sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the material using mechanical fasteners or adhesives, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to rough edges and material stress. | Employ sharp, industrial-grade cutting tools specifically designed for polymers to ensure clean cuts and maintain material integrity. |
| Over-tightening fasteners, causing localized stress concentrations and potential cracking. | Use appropriate torque settings for fasteners and consider incorporating washers to distribute load evenly across the nylon surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and bearings, Electrical insulation components, Protective covers and shielding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||