This robust Nylon stock sheet, with its substantial 0.684" thickness, is engineered for the rigorous demands of pneumatic systems. Offering superior wear and impact resistance, it ensures long-term operational integrity.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.684" |
| Length | 39" |
| Width | 29" |
Engineered for reliability and performance, this Nylon stock sheet boasts a robust 0.684" thickness, a generous 39" length, and a 29" width. Composed of high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, making it ideal for components in pneumatic cylinders, valve bodies, and sealing elements. Its inherent toughness allows it to withstand repeated pressure cycles and mechanical stress without degradation, ensuring consistent performance in demanding industrial environments. This material's excellent machinability facilitates precise fabrication of custom pneumatic parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Accurately machine to the required dimensions using appropriate tooling for nylon. 3. Integrate the fabricated component into the pneumatic system, ensuring proper sealing and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard machining speeds and feeds not optimized for nylon, leading to melting or poor surface finish. | Utilize slower speeds and higher feed rates with sharp cutting tools designed for plastics to prevent overheating and ensure a clean cut. |
| Over-tightening fasteners, which can cause stress cracking in the nylon material. | Apply torque evenly and within the material's recommended limits, using washers to distribute load if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic Cylinder Components, Valve Body Fabrication, Wear Strips and Bushings, Sealing Elements in Pneumatic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||