This high-performance nylon stock sheet offers exceptional durability and wear resistance for demanding industrial environments. Its robust material properties ensure reliable performance in a wide range of applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.668" |
| Length | 27" |
| Width | 21" |
Manufactured under strict quality controls, this nylon stock sheet exhibits superior mechanical strength and excellent resistance to abrasion and chemicals. With a precise thickness of 0.668 inches, a length of 27 inches, and a width of 21 inches, it provides ample material for custom fabrication of jigs, fixtures, wear pads, and components requiring low friction surfaces. The inherent self-lubricating properties of nylon minimize wear and extend the service life of mating parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to ensure optimal adhesion or structural integrity. 2. Precisely cut the nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 3. Secure the sheet using mechanical fasteners or suitable industrial adhesives, ensuring a firm and stable installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense polymers. | Employ sharp, industrial-grade cutting tools specifically designed for plastics and polymers to achieve clean, precise cuts and prevent material delamination. |
| Inadequate surface preparation for bonding or mounting. | Thoroughly clean and degrease both the nylon sheet and the mounting surface. For adhesive applications, consider light abrasion of the nylon surface to enhance bond strength. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Jigs and Fixtures, Wear Strips and Bushings, Guide Rails and Rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||