This robust Nylon stock sheet provides exceptional wear resistance and mechanical strength for demanding industrial applications. Its precise dimensions ensure reliable performance in custom fabrication and replacement parts.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.655" |
| Length | 41" |
| Width | 16" |
A high-performance industrial component, this Nylon stock sheet boasts a substantial thickness of 0.655 inches, a length of 41 inches, and a width of 16 inches. Engineered from durable Nylon, it exhibits excellent tensile strength, impact resistance, and low friction properties, making it ideal for applications requiring longevity and reduced wear. Its chemical resistance to oils and solvents further enhances its utility in harsh manufacturing environments. This material is readily machinable, allowing for precise customization to meet specific engineering requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired cut on the Nylon stock sheet. 2. Utilize a high-speed saw with appropriate blade for Nylon to make clean cuts. 3. Smooth any rough edges using a deburring tool or fine-grit sandpaper.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a blade not designed for plastic, leading to melting or chipping. | Employ a blade with a high tooth count and a negative rake angle, specifically designed for cutting plastics like Nylon. |
| Applying excessive force during cutting, causing the sheet to crack or splinter. | Allow the saw to do the work; maintain a steady, controlled feed rate to prevent stress on the material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guides, Bushings and bearings, Custom machine parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||