This premium Nylon Stock Sheet offers exceptional mechanical strength and wear resistance. Precisely manufactured to exact specifications, it's ideal for custom fabrication and demanding industrial components.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.654" |
| Length | 25" |
| Width | 21" |
Manufactured under strict quality controls, this Nylon Stock Sheet boasts a nominal thickness of 0.654 inches, a length of 25 inches, and a width of 21 inches. Composed of high-grade Nylon 6/6, it exhibits excellent tensile strength, high impact resistance, and superior abrasion resistance. Its low coefficient of friction makes it suitable for sliding components, while its good chemical resistance ensures longevity in various environments. This material is engineered for machining and fabrication into custom parts for gears, bearings, wear strips, and structural components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Precisely machine the Nylon Stock Sheet to required dimensions. 3. Securely fasten the fabricated component using appropriate hardware, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that may gall with nylon. | Employ stainless steel or coated fasteners, and consider using washers to distribute load. |
| Machining at excessive speeds, causing melting or tool wear. | Utilize sharp cutting tools and maintain appropriate machining speeds and feeds, with adequate coolant if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Gears, Wear Strips and Bushings, Impact-Resistant Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||