This robust Nylon stock sheet offers superior wear resistance and excellent mechanical properties, ideal for fabricating custom pneumatic components. Its high tensile strength ensures reliable performance in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.649" |
| Length | 29" |
| Width | 16" |
Built to exacting engineering tolerances, this 0.649-inch thick Nylon stock sheet provides a foundation for high-performance pneumatic systems. Exhibiting a low coefficient of friction, excellent impact strength, and good chemical resistance, it is well-suited for dynamic components. The 29-inch length and 16-inch width allow for efficient fabrication of custom cylinders, bearings, seals, and wear pads within pneumatic machinery, ensuring precise fit and extended operational life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark dimensions on the Nylon stock sheet according to design specifications. 2. Utilize appropriate cutting tools (e.g., industrial saw with fine-tooth blade) to achieve precise cuts. 3. Machine or finish edges as required for proper assembly into pneumatic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not suited for dense Nylon, leading to chipping or melting. | Employ sharp, high-quality cutting blades designed for plastics, and ensure adequate cooling to prevent material degradation. |
| Over-tightening fasteners when integrating Nylon components, causing stress fractures. | Apply appropriate torque values and consider using washers to distribute load evenly, preventing localized stress. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Pneumatic Cylinder Components, Wear Strips and Guide Bushings, Sealing Elements and Gaskets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||