This high-density Nylon stock sheet offers exceptional durability and wear resistance. Precisely manufactured to exacting tolerances for demanding industrial environments and custom fabrication projects.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.643" |
| Length | 42" |
| Width | 34" |
Specified by design engineers worldwide, this robust Nylon stock sheet boasts a nominal thickness of 0.643 inches, a standard length of 42 inches, and a width of 34 inches. Composed of high-grade nylon polymer, it exhibits superior tensile strength, excellent abrasion resistance, and a low coefficient of friction, making it ideal for load-bearing components, wear pads, and protective barriers in harsh industrial settings. Its excellent machinability allows for intricate part creation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from debris. 2. Accurately measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using recommended fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting tool selection leading to delamination or rough edges. | Utilize high-speed steel or carbide-tipped saw blades specifically designed for cutting plastics, with adequate coolant to prevent overheating. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Employ washers and torque fasteners to the manufacturer's recommended specifications to distribute load evenly and avoid material deformation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Gears and Sprockets, Protective Liners and Impact Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||