This industrial-grade Nylon stock sheet offers exceptional strength, wear resistance, and impact absorption. Precisely cut to 0.623" x 43" x 29", it's ideal for fabricating custom components requiring robust performance in demanding environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.623" |
| Length | 43" |
| Width | 29" |
Precision-manufactured to tight tolerances, this Nylon stock sheet is engineered for superior dimensional stability and performance. Measuring 0.623 inches thick, 43 inches in length, and 29 inches in width, it leverages the inherent properties of Nylon, including excellent abrasion resistance, low coefficient of friction, and good chemical resistance. This material composition makes it suitable for applications requiring robust mechanical properties and longevity under stress and wear. Its substantial dimensions allow for the fabrication of larger, more complex parts with minimal waste.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark desired dimensions on the Nylon stock sheet. 2. Utilize appropriate sawing or cutting equipment (e.g., band saw, jig saw with suitable blade) to make clean cuts. 3. Deburr edges to ensure a smooth finish and prevent potential chipping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect blade for cutting Nylon. | Employ sharp, specifically designed blades for plastics or Nylon to achieve clean cuts and prevent melting or chipping. |
| Overheating the material during cutting, leading to melting. | Use a slow, steady feed rate and ensure adequate lubrication or cooling (if applicable to the cutting method) to manage heat build-up. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom bearing and bushing fabrication, Wear strips and guide components, Protective shields and covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||