This robust Nylon Stock Sheet is engineered for high-performance pneumatic systems. Its exceptional durability and impact resistance make it ideal for critical components in demanding industrial settings.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.617" |
| Length | 41" |
| Width | 42" |
Designed for demanding industrial environments, this Nylon Stock Sheet boasts a substantial 0.617" thickness, 41" length, and 42" width. Fabricated from high-grade nylon, it exhibits superior tensile strength, excellent abrasion resistance, and remarkable impact toughness, ensuring longevity even under extreme operational pressures and mechanical stress. Its material properties make it an optimal choice for fabricating custom pneumatic components such as wear pads, seals, guards, and manifold blocks.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Machine or form the cut material according to the specific pneumatic component design. 3. Install the fabricated component within the pneumatic system, ensuring proper seating and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized components leading to premature wear. | Always fabricate components with sufficient material thickness and design margins to exceed expected operational loads. |
| Improper machining leading to stress concentrations. | Utilize sharp tooling and appropriate feed rates when machining nylon to avoid excessive heat buildup and internal stresses. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pneumatic cylinder components, Wear-resistant seals and gaskets, Impact protection guards, Manifold block fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||