This robust Nylon stock sheet offers exceptional wear resistance and impact strength. Precisely manufactured to 0.616" thickness, 32" width, and 33" length, it's engineered for demanding industrial fabricating tasks.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.616" |
| Length | 32" |
| Width | 33" |
A proven choice for industrial professionals, this Nylon stock sheet boasts superior mechanical properties, including excellent abrasion resistance, high tensile strength, and good chemical inertness. Its dense, homogenous structure at 0.616" thickness provides exceptional durability for components subjected to high stress and wear. The dimensions of 32" x 33" offer ample material for custom fabrication of gears, bushings, wear pads, and structural components in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of contaminants. 2. Fabricate to precise design specifications using appropriate cutting and machining tools. 3. Secure or integrate the fabricated Nylon component according to engineering drawings and best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improperly setting machining speeds and feeds, leading to excessive heat build-up and potential material degradation. | Utilize sharp tooling and appropriate cutting speeds/feeds recommended for Nylon to manage heat effectively and maintain material integrity. |
| Failure to account for thermal expansion and contraction of Nylon during design and installation. | Design with appropriate clearances to accommodate Nylon's thermal expansion characteristics, especially in environments with significant temperature fluctuations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Gears and Sprockets, Impact Plates, Custom Machine Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||