This high-performance Nylon Stock Sheet offers superior wear resistance and self-lubricating properties. Its robust nature and precise dimensions make it ideal for demanding industrial applications requiring minimal friction and long service life.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.614" |
| Length | 26" |
| Width | 43" |
Built to exacting engineering tolerances, this Nylon Stock Sheet measures 0.614 inches thick, 26 inches in length, and 43 inches in width. Engineered from a high-quality, self-lubricating grade of nylon (typically Nylon 6 or Nylon 6/6 with additives), it exhibits excellent abrasion resistance, low coefficient of friction, and good mechanical strength. This material is ideal for fabricating wear pads, bushings, rollers, and guide components where reduced lubrication and extended operational life are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully cut the nylon stock sheet to the required dimensions using appropriate cutting tools for plastic. 2. Machine or form the component to its final design specifications, ensuring precise tolerances are maintained. 3. Install the fabricated nylon part into the intended assembly, verifying proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard nylon when a lubricating grade is specified. | Always select a lubricating grade of nylon for applications requiring reduced friction and wear. |
| Over-tightening fasteners when mounting nylon components. | Allow for thermal expansion and contraction; use appropriate torque settings and consider compression limiters. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Self-lubricating bushings and bearings, Rollers and idlers in conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||