This robust Nylon stock sheet offers exceptional wear resistance and mechanical strength. Precisely manufactured to 0.592" thickness, 33" length, and 14" width, it's engineered for superior performance in rigorous industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.592" |
| Length | 33" |
| Width | 14" |
A proven choice for industrial professionals, this Nylon stock sheet boasts a substantial 0.592" thickness, providing exceptional rigidity and load-bearing capacity. Composed of high-grade Nylon, it exhibits superior tensile strength, excellent abrasion resistance, and good impact toughness, making it suitable for applications involving significant mechanical stress. Its dimensions of 33" in length and 14" in width allow for fabrication of large components and parts. This material is also resistant to many chemicals and oils, further enhancing its versatility in demanding operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Accurately measure and mark the desired dimensions on the Nylon sheet. 3. Utilize appropriate cutting tools (e.g., industrial saws with fine-tooth blades) for a clean, precise cut. Avoid excessive heat generation during cutting. 4. Smooth any rough edges with a deburring tool or fine-grit sandpaper.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to ragged edges and potential material stress. | Employ sharp, industrial-grade cutting blades specifically designed for plastics. Ensure blades are adequately lubricated if recommended for the specific cutting method. |
| Excessive heat generation during cutting, causing melting or deformation of the Nylon. | Employ a slow, steady cutting speed and consider using a coolant or air blast to dissipate heat. If using a laser or hot wire cutter, ensure correct power and speed settings. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-wear components and bushings, Gears and sprockets, Structural supports and brackets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||