This premium nylon stock sheet offers exceptional durability and wear resistance. Its robust properties make it ideal for manufacturing custom components and high-stress applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.588" |
| Length | 47" |
| Width | 14" |
Precision-manufactured to tight tolerances, this 0.588" thick nylon stock sheet measures 14" wide by 47" long. Fabricated from high-grade nylon, it exhibits excellent tensile strength, impact resistance, and a low coefficient of friction, ensuring self-lubricating properties. Its inherent machinability allows for intricate custom part fabrication. This material is engineered for longevity in demanding environments, resisting abrasion and chemical degradation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Determine precise cutting dimensions based on application requirements. 2. Utilize appropriate cutting tools (e.g., band saw, router) for clean, accurate material removal. 3. Finish edges as needed for desired fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper setup, leading to melting or chipping. | Employ sharp, high-speed cutting tools with adequate cooling to prevent thermal degradation and ensure clean cuts. |
| Over-tightening fasteners in fabricated parts, potentially causing stress cracking. | Utilize appropriate torque settings and consider incorporating washers or bushings to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom bearing and bushing fabrication, Wear strips and guide rails, Gears and sprockets for moderate loads.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||