Engineered for superior performance, this 0.587-inch thick lubricating nylon stock sheet offers exceptional wear resistance and a low coefficient of friction. Ideal for demanding environments requiring reliable material solutions.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.587" |
| Length | 27" |
| Width | 33" |
Manufactured under strict quality controls, this 0.587-inch thick nylon stock sheet measures 27 inches in length and 33 inches in width. Composed of high-grade Nylon, it exhibits excellent self-lubricating properties, superior abrasion resistance, and good impact strength. Its inherent low friction reduces wear and tear on mating components, making it suitable for applications involving sliding or rolling contact, such as bearings, bushings, and wear pads. This material is dimensionally stable and can withstand moderate loads and temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the required dimensions on the stock sheet. 2. Utilize appropriate cutting tools, such as band saws or CNC routers, for precise shaping. 3. Smooth all cut edges using files or deburring tools to remove any sharp or rough surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools that generate excessive heat, potentially deforming the nylon. | Employ sharp blades with adequate coolant or lubrication, and maintain a consistent feed rate to minimize heat buildup. |
| Over-tightening fasteners when mounting, leading to localized stress and potential cracking. | Use washers to distribute load and tighten fasteners to the recommended torque specifications for nylon components. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Low-friction bearings and bushings, Wear strips and guides, Chute liners and slide surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||