This high-performance Nylon stock sheet provides exceptional durability and wear resistance, making it the superior choice for robust pneumatic components and demanding industrial applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.587" |
| Length | 21" |
| Width | 27" |
Designed for demanding industrial environments, this Nylon stock sheet boasts a substantial 0.587" thickness, ensuring superior structural integrity and impact resistance. Its dimensions of 21" x 27" offer ample material for custom fabrication. Exhibiting excellent tensile strength, low coefficient of friction, and good chemical resistance, it is ideally suited for the fabrication of pneumatic cylinders, seals, bearings, and wear strips where high loads and continuous operation are critical. The material's inherent toughness minimizes wear and extends component lifespan.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the nylon stock sheet to the required dimensions using appropriate tooling. 2. Machine or form the cut material into the desired pneumatic component specifications. 3. Install the fabricated component, ensuring proper alignment and sealing within the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools leading to delamination or chipping. | Employ sharp, purpose-built cutting tools specifically designed for machining plastics like nylon, such as carbide-tipped saws or routers. |
| Overheating the material during machining, causing melting or deformation. | Utilize appropriate feed rates and cooling methods (e.g., air blast, coolant) to maintain a safe operating temperature during cutting and shaping. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic Cylinder Components, Seals and Gaskets, Wear Strips and Bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||