This high-performance Nylon stock sheet is engineered for durability in challenging pneumatic applications. Its robust material properties ensure longevity and reliable performance in demanding industrial settings.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.576" |
| Length | 30" |
| Width | 28" |
Designed for demanding industrial environments, this 0.576-inch thick Nylon stock sheet offers exceptional strength and wear resistance. With dimensions of 30 inches in length and 28 inches in width, it provides ample material for fabrication of critical pneumatic components such as seals, bushings, and wear pads. Nylon's inherent lubricity and resistance to abrasion make it an ideal choice for applications subjected to continuous movement and high loads, ensuring reduced friction and extended service life within pneumatic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 2. Machine or form the cut material according to the specific design requirements of the pneumatic component. 3. Integrate the fabricated Nylon part into the pneumatic system, ensuring proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to material stress or fracture. | Utilize sharp, dedicated cutting tools designed for plastics, and ensure consistent feed rates to prevent overheating and chipping. |
| Over-machining or inadequate lubrication during fabrication, causing melting or poor surface finish. | Employ appropriate cutting speeds and feed rates, and use a suitable cutting fluid or air blast for cooling and chip removal. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic Seals and Gaskets, Wear Strips and Bushings, Custom Component Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||