This premium Nylon stock sheet offers exceptional wear resistance, low friction, and high tensile strength. Its robust construction makes it suitable for a wide range of demanding industrial fabrication and component manufacturing.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.576" |
| Length | 35" |
| Width | 47" |
Specified by design engineers worldwide, this Nylon stock sheet provides a superior combination of mechanical properties. Measuring 0.576 inches thick, 35 inches in length, and 47 inches in width, it is manufactured from high-grade Nylon 6/6 (or equivalent specification) for optimal performance. Its excellent impact resistance, chemical inertness to many solvents and oils, and good machinability allow for precise fabrication of custom parts, wear pads, bushings, and structural components in diverse industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the Nylon stock sheet using a suitable marking tool. 2. Utilize a high-speed saw with a fine-tooth blade (e.g., carbide-tipped) for clean, precise cuts, employing coolant to prevent overheating. 3. Deburr all cut edges using a file or router to achieve a smooth finish and remove any sharp points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect saw blade, leading to chipping and rough edges. | Employ a sharp, fine-tooth carbide-tipped blade specifically designed for plastic cutting and ensure proper blade speed. |
| Excessive heat generation during cutting, causing melting and material deformation. | Apply a cutting lubricant or coolant and maintain an appropriate feed rate to manage heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Custom fabricated machine parts, Chute liners, Gears and sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||