This robust Nylon stock sheet offers superior wear resistance and high load-bearing capacity. Its 0.570" thickness makes it ideal for demanding material handling applications requiring durability and strength.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.570" |
| Length | 14" |
| Width | 15" |
Built to exacting engineering tolerances, this Nylon stock sheet measures 0.570 inches thick, 14 inches in length, and 15 inches in width. Composed of high-performance Nylon 6/6, it exhibits excellent abrasion resistance, low coefficient of friction, and superior impact strength, making it suitable for a variety of material handling components such as wear strips, guides, rollers, and chute liners where reduced friction and extended service life are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using appropriate hardware, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that can embed into the Nylon over time. | Utilize wide-headed or flanged fasteners to distribute load and prevent indentation. |
| Overtightening fasteners, which can cause stress cracking in the Nylon. | Tighten fasteners to the manufacturer's recommended torque specifications, avoiding excessive force. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Chute and Hopper Liners, Rollers and Bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||