This robust Nylon stock sheet provides superior strength and wear resistance. Its high dielectric properties make it ideal for demanding industrial environments requiring durable, non-conductive material solutions.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.554" |
| Length | 15" |
| Width | 47" |
Manufactured under strict quality controls, this 0.554-inch thick Nylon stock sheet measures 15 inches in width and 47 inches in length. Composed of high-grade nylon, it exhibits exceptional tensile strength, abrasion resistance, and a high modulus of elasticity, ensuring longevity in demanding operational conditions. Its inherent dielectric properties make it suitable for electrical insulation and protective components. The material's low coefficient of friction also contributes to its utility in bearing and wear applications, providing smooth operation and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from debris. 2. Precisely cut the nylon sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut sheet to the substrate using recommended industrial-grade adhesives or mechanical fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Employ specialized plastic cutting blades or routers with appropriate feed rates and cooling to prevent material degradation. |
| Over-tightening fasteners, causing stress concentrations and potential cracking of the nylon. | Utilize washers or backing plates to distribute load evenly and torque fasteners to manufacturer specifications to avoid over-compression. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Electrical Insulation Components, Bushings and Bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||