This high-performance lubricating nylon stock sheet is engineered for demanding applications. Its inherent lubricity and robust material properties ensure superior wear resistance and reduced friction in critical components.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.548" |
| Length | 14" |
| Width | 47" |
Manufactured under strict quality controls, this Nylon Stock Sheet boasts a precise thickness of 0.548 inches, a standard length of 14 inches, and a width of 47 inches. Composed of high-grade nylon, it exhibits excellent mechanical strength, toughness, and a naturally low coefficient of friction. This material is specifically formulated for applications requiring self-lubrication, reduced wear, and resistance to abrasion and impact. Its dimensional stability and chemical resistance make it suitable for a wide range of industrial environments and operational demands.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Accurately cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut component using standard mechanical fastening methods, taking care not to over-tighten.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners which can lead to material deformation or cracking. | Utilize appropriate torque specifications for fasteners and consider using washers to distribute load. |
| Using incorrect cutting tools that may cause delamination or rough edges. | Employ sharp, high-speed cutting tools designed for plastics, such as carbide-tipped blades, and consider a coolant for smoother cuts. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guide rails, Bushings and bearings, Gears and sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||