This robust Nylon Stock Sheet, engineered for superior abrasion resistance and controlled polishing, offers exceptional durability and consistent performance in rigorous industrial settings.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.539" |
| Length | 15" |
| Width | 28" |
Designed for demanding industrial environments, this Nylon Stock Sheet boasts a substantial thickness of 0.539 inches, a convenient width of 15 inches, and a generous length of 28 inches. Its high-performance nylon composition provides excellent wear resistance, low coefficient of friction, and good impact strength, making it ideal for custom fabrication of wear pads, guides, and polishing tools. The material's inherent toughness ensures longevity even under heavy loads and continuous operation, minimizing downtime and maintenance requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the required dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw, laser cutter) to precisely cut the marked shape. 3. Smooth any rough edges with a file or sanding material for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools leading to delamination or uneven edges. | Employ high-speed steel or carbide-tipped blades designed for plastic cutting, ensuring adequate cooling. |
| Overheating the nylon during cutting or machining, causing melting or deformation. | Maintain a consistent feed rate and use coolants or air jets to dissipate heat effectively. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and components, Polishing and buffing fixtures, Machine guides and slides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||