This high-performance Nylon stock sheet offers exceptional durability and wear resistance for demanding material handling tasks. Its robust properties ensure longevity and reliable performance in industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.537" |
| Length | 24" |
| Width | 39" |
Precision-manufactured to tight tolerances, this 0.537-inch thick Nylon stock sheet measures 24 inches by 39 inches. Composed of high-grade Nylon 6/6, it exhibits superior abrasion resistance, excellent impact strength, and a low coefficient of friction, making it ideal for reducing wear on moving parts. Its inherent lubricity minimizes friction, facilitating smooth material flow and extending the lifespan of components in chutes, liners, guide rails, and wear pads. This material is also resistant to many chemicals and solvents, further enhancing its suitability for diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet to the intended substrate using suitable industrial fasteners, ensuring even distribution of load and avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for industrial environments. | Employ corrosion-resistant, high-tensile strength fasteners appropriate for the specific operational load and environmental conditions. |
| Improperly aligning the sheet, leading to uneven stress and premature wear. | Carefully measure and mark all mounting points, ensuring perfect alignment before drilling and fastening. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear liners for chutes and hoppers, Guide rails and slide surfaces, Impact plates and wear pads.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||